Super Anchor Safety CRA Anchors – Stud Mount Loop Tops

Super Anchor Safety’s Pre-Engineered permanent Cast Loop Top Fixtures can be used in a variety of applications. Wall and ceiling applications are the idea with these anchors. Very low profile and installed with bolts, welds or nuts. These are designed as a single user fall protection anchor point, a window-washing suspension/tie-back anchor point or as a horizontal lifeline intermediate anchor.

CRA Overview (see the Instruction/Specification Manual for details):

• DECKING ATTACHMENTS: Wood Decking, Metal Decking, Existing Concrete Decks, Pour-In Place Concrete Decks, Structural Wood Beams and Structural Steel
• ATTACHMENT HARDWARE: 5/8”” Grade-8 Bolts, A-307 Threaded Rod and Field Welds
• 3 ATTACHMENT METHODS TO CHOOSE FROM:
  • Bolt-On Attachment using 5/8”-11 x___ grade 8, 18-2 Stainless Steel or A-307 All Thread
  • Weld-On Attachment using Welding Specifications per Instruction Manual
  • Stud-Bolt Attachment using 5/8”-11 nut and washer
• SIZE & STRENGTH:
  • 2-5/8” Outside Diameter with 1-3/8” Inside Diameter. 5,000-pound rating
• MATERIALS:
  • ASTM 123 Hot Dip Galvanized
  • 316 Grade Stainless Steel
• 3 PRODUCT I.D. LABEL ATTACHMENT OPTIONS:
  • Through bolt and Stud bolt label package
  • Hex head bolt attached label direct to anchors
  • Provisional tether strap/zip tie to loop top
• Closed Cast Loop Top

Super Anchor Safety offers 2 proprietary loop top and pass through designs with several attachment options that comply with US fall protection standards. This is the same design that is used on the CRA, CRZ and CRO commercial roof anchors and risers. These fixtures are made with high strength cast steel and 316 stainless steel. For your assurance, the loop tops are 3rd party tested and certified for personal fall protection and horizontal lifeline systems.

Window Washing Suspension

Roof and Wall Safety/Tie-Back Anchors for window washing suspension require special consideration. North America safety standards require a building to have certified anchorages capable of supporting the necessary loads before any worker suspends from the anchor. Our anchors can help you provide compliance with OSHA, ANSI and IWCA I-14.1 standards for window cleaning or any other job requiring suspension over the edge of the building.

Window Washing suspension requires 2 anchors for the worker to tie off to – one anchor supports the workers equipment and one anchor is used for the safety lifeline or fall arrest equipment. The Super Anchor Safety CRA Anchors give you the compliance that you need at an affordable cost. Our unique line of anchors can be mounted to roof decking, concrete curbs/beams/walls, steel beams as well as other structures capable of supporting the intended loads. The CRA’s for window washing are designed for a 5,000-pound ultimate load, a 2,500-pound test load and a 1,250-pound allowable load. Parapet walls must be capable of supporting the intended loads, too.

RoofingDirect.com offers an excellent selection of Anchor Points made of high-quality materials for your next job. Our team has decades of industry experience and is always willing to help you out. Please contact us, and we’ll be able to answer any questions.