Loyalty Rewards

Malta Dynamics Permanent Roof Anchor

Item# A6302

Malta Dynamics Permanent Roof Anchor

Item# A6302

$46.95

Want $10 off Your Next Order?

x

Free
Factory

Estimated Delivery: Aug-14  -  Aug-21

Features + Benefits

  • Easy to install
  • Exclusive hole layout reduces damage to truss during install; Lightweight and durable; Can be installed with screws or nails; Fasteners provided (nails); Discreet design; Intended for permanent use on wood rooftops.
  • Meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-07, and ANSI A10.32-12
  • Worker Capacity Range: 130-310 lbs; Min. Breaking Strength: 5,000 lbs

Product Summary

The Malta Dynamics Permanent Roof Anchors have two D-Ring ends of alloy steel, an 18″ build,  and stainless steel body for exceptionally long life. Like all Malta Dynamics products, the Permanent Roof Anchor is entirely compliant with applicable ANSI and OSHA regulations. The Permanent Roof Anchor is designed for ease of installation and is ideal for both residential maintenance and construction work.

The tensile strength of this rugged stainless steel roof anchor is a minimum of 5,000 lbs (22.2 kN) in ANSI testing. Even with such powerful capabilities, it only weighs about a pound and features a sleek, discrete appearance. Its unique layout also helps minimize truss damage that could occur during installation. Fasteners are included, too, so you can be confident in installation.

Using these permanent roof anchors alongside the right safety harness can help you create safer, easier fall protection for your team. Browse our selection of harnesses and harness accessories for high-quality equipment from the industry leaders at Malta Dynamics.

How to Install a Permanent Roof Anchor

Permanent roof anchor installation is straightforward with this Malta Dynamics safety anchor. You can spend less time installing and more time getting to work. Before installing the safety anchor, carefully inspect it, along with the roof’s trusses, rafters and structural members. You’ll need to ensure the roof is structurally sound and that the equipment is not damaged in any way. You will also need to select a site that meets OSHA requirements, including minimized swing fall hazards and a limited free-fall distance of less than 6 feet.

All employees must be trained by a Competent Person, as defined by OSHA. Explore our training options if your team needs a refresher on fall protection awareness.

Installation steps are as follows:

  1. Remove 1-2 pieces of the ridge cap if installing on residential roofing with asphalt shingles, shakes or tile.
  2. Center the safety anchor on the ridge of the framing assembly, and position it so the nail holes on the center of the legs are directly centered with the middle of the roof framing member.
  3. Use 16d common nails to secure the bracket with all provided nail holes. No nails should split the timber or protrude through the side of the members

These steps are a brief overview of the installation procedures required for this permanent roof anchor — see the manual for more comprehensive instructions and use guidelines.

RoofingDirect.com offers an excellent selection of durable anchor points and safety accessories to keep you safe and secure on your next job. Our team has decades of industry experience and is ready to serve you. Please contact us, and we will be happy to answer any questions.



Features + Benefits

  • Easy to install
  • Exclusive hole layout reduces damage to truss during install; Lightweight and durable; Can be installed with screws or nails; Fasteners provided (nails); Discreet design; Intended for permanent use on wood rooftops.
  • Meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-07, and ANSI A10.32-12
  • Worker Capacity Range: 130-310 lbs; Min. Breaking Strength: 5,000 lbs

Item #A6302
BrandMalta Dynamics
Weight.5 lbs
MaterialStainless Steel body and Alloy D-rings

Product Question + Answer

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Product Summary

The Malta Dynamics Permanent Roof Anchors have two D-Ring ends of alloy steel, an 18″ build,  and stainless steel body for exceptionally long life. Like all Malta Dynamics products, the Permanent Roof Anchor is entirely compliant with applicable ANSI and OSHA regulations. The Permanent Roof Anchor is designed for ease of installation and is ideal for both residential maintenance and construction work.

The tensile strength of this rugged stainless steel roof anchor is a minimum of 5,000 lbs (22.2 kN) in ANSI testing. Even with such powerful capabilities, it only weighs about a pound and features a sleek, discrete appearance. Its unique layout also helps minimize truss damage that could occur during installation. Fasteners are included, too, so you can be confident in installation.

Using these permanent roof anchors alongside the right safety harness can help you create safer, easier fall protection for your team. Browse our selection of harnesses and harness accessories for high-quality equipment from the industry leaders at Malta Dynamics.

How to Install a Permanent Roof Anchor

Permanent roof anchor installation is straightforward with this Malta Dynamics safety anchor. You can spend less time installing and more time getting to work. Before installing the safety anchor, carefully inspect it, along with the roof’s trusses, rafters and structural members. You’ll need to ensure the roof is structurally sound and that the equipment is not damaged in any way. You will also need to select a site that meets OSHA requirements, including minimized swing fall hazards and a limited free-fall distance of less than 6 feet.

All employees must be trained by a Competent Person, as defined by OSHA. Explore our training options if your team needs a refresher on fall protection awareness.

Installation steps are as follows:

  1. Remove 1-2 pieces of the ridge cap if installing on residential roofing with asphalt shingles, shakes or tile.
  2. Center the safety anchor on the ridge of the framing assembly, and position it so the nail holes on the center of the legs are directly centered with the middle of the roof framing member.
  3. Use 16d common nails to secure the bracket with all provided nail holes. No nails should split the timber or protrude through the side of the members

These steps are a brief overview of the installation procedures required for this permanent roof anchor — see the manual for more comprehensive instructions and use guidelines.

RoofingDirect.com offers an excellent selection of durable anchor points and safety accessories to keep you safe and secure on your next job. Our team has decades of industry experience and is ready to serve you. Please contact us, and we will be happy to answer any questions.



Features + Benefits

  • Easy to install
  • Exclusive hole layout reduces damage to truss during install; Lightweight and durable; Can be installed with screws or nails; Fasteners provided (nails); Discreet design; Intended for permanent use on wood rooftops.
  • Meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-07, and ANSI A10.32-12
  • Worker Capacity Range: 130-310 lbs; Min. Breaking Strength: 5,000 lbs

Specs

Item #A6302
BrandMalta Dynamics
Weight.5 lbs
MaterialStainless Steel body and Alloy D-rings

Reviews

There are no reviews yet.

Be the first to review “Malta Dynamics Permanent Roof Anchor”

Your email address will not be published.

Warranty

Scroll to Top

Sign Up

Lost your password? Please enter your email address. You will receive mail with link to set new password.

Thank You!

Your registration was successful. You have received 10 points to use on your first order.