$0.00
Estimated Delivery:
Feb-13 - Feb-20
Looking to switch over to the Quarrix Composite Tile roof? Here are the essentials to get your new roof installed! Please submit a quote with the quantities needed for each item. Don’t know how much you need? Put your roof’s details and measurements in the notes section and we can help you out!
The Quarrix Composite Roof Tile provides the same beautiful look as traditional clay and concrete tiles but with the benefits of a lightweight synthetic roof tile material. 67% less weight than traditional roof tiles, Quarrix double barrel roof tile can be installed on existing homes and buildings without needing structural roof modifications that other materials may require. Each synthetic tile is lightweight, fast and easy to install weighing only 3.38 lbs. Each piece interlocks, is pre-drilled and features easy-to-read alignment marks. This composite roofing material can be cut, drilled and fastened with standard tile roofing tools and does not contain silica or lead.
Use the Quarrix Hip / Ridge / Rake Tile on rake edges to complete a traditional tile aesthetic. This component can also be used to box in the rake and butt tile to the rake edge for a distinct appearance as well.
The Quarrix Hip Starter Tile is recommended for hip installations. Simply begin with a hip starter tile on the eave edge and continue up the rake with the Quarrix Hip / Ridge / Rake Tile. For applications requiring intersections of multiple hips, or ridge and hips, the hip starter tile can be coped to provide a traditionally, beautiful tile look.
Quarrix Lower Metal Eave Closures (or bird stop) are made of Kynar-Coated, G90 galvanized steel and are pressure fitted pieces that snap into the ends of Quarrix field tiles located on any eave edge and fill what otherwise would be a visible void along the lower roof edge. A weep hole provides any moisture under the tile to escape.
Quarrix Universal Tile Flashing is an all-in-one roll-able tile flashing product that can be used as a primary flashing, a counter flashing, or in combination with bent metal flashing. Its a fully-adhered, expandable aluminum flashing designed with a unique butyl backing that provides a weather-tight seal on a head wall, chimney, hip, ridge, gable end, skylight or pipe stack. The expandable nature of the roll flashing allows it to contour to complex shapes with no specialty tools needed. The superior features of Quarrix Universal Tile Flashing prevents against water leakage and structural roof damage to most roofing materials including asphalt, clay, concrete, steel and synthetic roof tile. Designed for pitches measure 3/12 – 20/12. Each roll measures 11.75″ x 16′.
Quarrix’s Universal Tile Ridge Vent assists in creating attic ventilation and airflow under the tile to help achieve a cool roof system. This all-in-one, rollable tile roof ridge vent combines ridge ventilation and weather blocking into one. Made of durable, UV-resistant aluminum with a synthetic release liner designed to contour to complex shapes with its peel-off butyl adhesive. Designed for pitches measure 3/12 – 20/12. Each roll measures 15.75″ x 16′.
The Quarrix DryRoof Batten provides superior protection that ensures proper water drainage and airflow under composite, concrete and clay tile. Install directly to the roof deck to elevate the roofing material to keep the roof deck properly ventilated. Engineered with small air channels allowing water drainage and airflow to the roof deck to stay dry and prevent rot. Constructed of HDPE plastic, DryRoof Roof Battens are resistant to warping, splitting, mold and mildew, a longer lasting alternative to wood battens. When building a roof with synthetic, composite, concrete or clay materials it’s imperative to have a strong batten system that can support and last the life of the roof. Each piece measure 8’8″ x 1.5″ x .75″. This product is sold by the box of 12 pieces.
Quarrix Tile Roofing Screws are heavy-duty, corrosion resistant, exterior grade tile roofing screws specially engineered and recommended for securing composite roof tile to the roof deck. The roofing tile fasteners high-low thread configuration and spade-point quickly and easily penetrate wood, steel and composite materials. Tested to SAE J78 standard with an overall fastener length of 2-3/4” and 1-1/2” thread meets installation specifications. Sold in boxes of 100 or 1200 screws.
| Brand | Quarrix |
| Weight | 1 lbs |
There are no questions yet. Be the first to ask a question about this product.
Looking to switch over to the Quarrix Composite Tile roof? Here are the essentials to get your new roof installed! Please submit a quote with the quantities needed for each item. Don’t know how much you need? Put your roof’s details and measurements in the notes section and we can help you out!
The Quarrix Composite Roof Tile provides the same beautiful look as traditional clay and concrete tiles but with the benefits of a lightweight synthetic roof tile material. 67% less weight than traditional roof tiles, Quarrix double barrel roof tile can be installed on existing homes and buildings without needing structural roof modifications that other materials may require. Each synthetic tile is lightweight, fast and easy to install weighing only 3.38 lbs. Each piece interlocks, is pre-drilled and features easy-to-read alignment marks. This composite roofing material can be cut, drilled and fastened with standard tile roofing tools and does not contain silica or lead.
Use the Quarrix Hip / Ridge / Rake Tile on rake edges to complete a traditional tile aesthetic. This component can also be used to box in the rake and butt tile to the rake edge for a distinct appearance as well.
The Quarrix Hip Starter Tile is recommended for hip installations. Simply begin with a hip starter tile on the eave edge and continue up the rake with the Quarrix Hip / Ridge / Rake Tile. For applications requiring intersections of multiple hips, or ridge and hips, the hip starter tile can be coped to provide a traditionally, beautiful tile look.
Quarrix Lower Metal Eave Closures (or bird stop) are made of Kynar-Coated, G90 galvanized steel and are pressure fitted pieces that snap into the ends of Quarrix field tiles located on any eave edge and fill what otherwise would be a visible void along the lower roof edge. A weep hole provides any moisture under the tile to escape.
Quarrix Universal Tile Flashing is an all-in-one roll-able tile flashing product that can be used as a primary flashing, a counter flashing, or in combination with bent metal flashing. Its a fully-adhered, expandable aluminum flashing designed with a unique butyl backing that provides a weather-tight seal on a head wall, chimney, hip, ridge, gable end, skylight or pipe stack. The expandable nature of the roll flashing allows it to contour to complex shapes with no specialty tools needed. The superior features of Quarrix Universal Tile Flashing prevents against water leakage and structural roof damage to most roofing materials including asphalt, clay, concrete, steel and synthetic roof tile. Designed for pitches measure 3/12 – 20/12. Each roll measures 11.75″ x 16′.
Quarrix’s Universal Tile Ridge Vent assists in creating attic ventilation and airflow under the tile to help achieve a cool roof system. This all-in-one, rollable tile roof ridge vent combines ridge ventilation and weather blocking into one. Made of durable, UV-resistant aluminum with a synthetic release liner designed to contour to complex shapes with its peel-off butyl adhesive. Designed for pitches measure 3/12 – 20/12. Each roll measures 15.75″ x 16′.
The Quarrix DryRoof Batten provides superior protection that ensures proper water drainage and airflow under composite, concrete and clay tile. Install directly to the roof deck to elevate the roofing material to keep the roof deck properly ventilated. Engineered with small air channels allowing water drainage and airflow to the roof deck to stay dry and prevent rot. Constructed of HDPE plastic, DryRoof Roof Battens are resistant to warping, splitting, mold and mildew, a longer lasting alternative to wood battens. When building a roof with synthetic, composite, concrete or clay materials it’s imperative to have a strong batten system that can support and last the life of the roof. Each piece measure 8’8″ x 1.5″ x .75″. This product is sold by the box of 12 pieces.
Quarrix Tile Roofing Screws are heavy-duty, corrosion resistant, exterior grade tile roofing screws specially engineered and recommended for securing composite roof tile to the roof deck. The roofing tile fasteners high-low thread configuration and spade-point quickly and easily penetrate wood, steel and composite materials. Tested to SAE J78 standard with an overall fastener length of 2-3/4” and 1-1/2” thread meets installation specifications. Sold in boxes of 100 or 1200 screws.
| Brand | Quarrix |
| Weight | 1 lbs |
Your registration was successful. You have received 10 points to use on your first order.
Reviews
There are no reviews yet.